Pressure Cut
How the pressure cut minigame advances and wears the disc.
Every grind is a pressure cut while grinding.minigame = "pressure". Each stage the integration defines is one cut.
#Controls
Hold or tap left mouse, E, or Space to push the disc into the material. Keep the needle inside the zone as it wanders. Press X to stop. The keys follow grinding.pressure.keys and each player's GTA key bindings.
#Cutting & Wear
- In the zone, the cut advances at full speed and the disc wears at its base rate.
- In the golden band in the middle of the zone, the cut and the wear both run
golden.speedtimes faster, so a clean cut wears the same but ends sooner. - Outside the zone, the cut stops while the disc wears
penaltytimes faster, whether you push too hard or too light. - The first
graceSecondsof every cut are free, so you can find the zone. - Letting go does not pause the cut; the disc keeps wearing at the higher rate.
A clean grind wears half of the integration's rolled wear, multiplied by the disc's wearMultiplier. There is nothing random to react to, so perfect play wears only that base amount.
The disc meter drains live and turns red while the penalty applies. A disc that runs out mid-cut breaks and fails the grind. Stopping or walking away still wears the disc for what was already ground. A cut held outside the zone too long stalls and fails.
#Length & Difficulty
The integration lists skill check presets and seconds for each stage. Each preset adds secondsPerCheck to the cut, and the stage's seconds are added on top. The hardest preset picks the zone width, drift, and length multiplier from grinding.pressure.difficulties. Stages without checks use easy.
#Skill Checks Instead
Set grinding.minigame = "skillcheck" to run each stage's zyke_lib skill checks, followed by its progress bar. Each check wears a share of the rolled wear, halved on a pass. A failed check fails the grind.
See Config for every grinding setting.