Documentation

Fitting & Driving

How players fit, remove and drive on snow chains.

#Fitting a Chain

  1. Use a snow_chain on foot. You carry the chain in your hands, and every wheel within reach is marked.
  2. Aim at a wheel and press E. You walk up to the wheel and kneel.
  3. Pull the chain round the tyre with A and D in turn. Pulling with the same hand twice lets it slip back a step, and so does stopping halfway.
  4. Once it is round, press Space to tighten the tensioner.

X lets go of the chain. Pressing X while you carry it, or using the item again, puts it away.

The vehicle has to stand still, and only one player can work on a wheel at a time. Each wheel takes its own chain, so a car needs four for full grip and a six-wheel truck needs six.

#Removing a Chain

Walk up to a wheel with a chain, aim at it and press E. Loosen the tensioner with Space, then pull the chain off with A and D. The chain goes back into your inventory with its wear as item durability.

#Driving on Snow

In snowy weather, or on snow and ice ground, every vehicle loses grip, spins its wheels when pulling away and brakes later, more so at speed.

Each wheel with a chain wins part of the grip back. Chains on every wheel give back 75% of the lost grip by default, so the vehicle still slides more than on a dry road. Vehicles with chains are limited to 80 km/h by default.

On dry roads chains grip slightly worse than tyres, spark at speed and wear quickly, so take them off when the snow is gone.

#Wear

A new chain has 100 health. Chains wear slowly on snow and quickly on dry tarmac or at speed. When a chain is almost worn through it rattles as you drive, and at 0 it snaps off the wheel and is gone. A removed chain keeps its health as item durability, and fitting it again carries that health back to the wheel.

#Saving

Fitted chains are saved by plate, so they stay on the vehicle through garages, despawns and restarts. By default only vehicles a player owns are kept. See Config.Settings.saving in the Config.