Commands
Commands and default keybinds.
Use / in chat; omit it in F8. These commands run in game. Each command checks its configured permission through zyke_lib.
#Admin Commands
| Title | Description | Command(s) |
|---|---|---|
| Place Dynos | Takes out the placing tool, which places dynos where you aim and saves them in the database, and removes the dynos it placed. Uses admin.permission. See Placing Dynos. | /dynos |
| Calibrate | Prints every input and factor of the formula for the car you sit in, and the power they give, to the F8 console. Uses calibrate.permission. See Formula & Calibration. | /dynocalibrate |
The command names are configurable under Config.Settings.dyno.admin.command and Config.Settings.dyno.calibrate.command.
#Default Keybinds
| Action | Default Key |
|---|---|
| Start a run, with the car lined up on a dyno | E |
A panel at the bottom of the screen lists the keys that apply on the dyno, during a run, after it, and with the placing tool out.
#Run Controls
| Action | Key |
|---|---|
| Make the pull | Hold the throttle flat |
| Brake the rollers | S |
| Stop the run | Backspace |
#Sheet Controls
Shown to the driver after the run, and to players who are shown a sheet or use a printed one.
| Action | Key |
|---|---|
Print the sheet as a dyno_sheet item | E |
| Show the sheet to the players within 5 metres | G |
| Close | Backspace, X, or right mouse button |
Only the driver can print or show their own result.
#Placing Tool Controls
| Action | Key |
|---|---|
| Place the dyno, or remove the marked one | Left mouse button |
| Turn the dyno 1°, while it isn't lined up with another | Scroll wheel |
| Turn it 10° | Hold Shift and scroll |
| Switch between lined up and free placing | C |
| Move the screen to the left, the right, or leave it out | Q |
| Switch between placing and removing | Z |
| Put the tool away | Right mouse button, Esc, or Backspace |